Дріт та кабель
РЕЛЕ , КОНТАКТОРЫ, ДАТЧИКИ И СОЛЕНОИДЫ
З'єднувачі
• Miniature hermetically sealed relays 
• Non-latching 
• Through hole and gull-wing surface mount terminals 
• High frequency models capable of switching up through 6 GHz 
• Excellent isolation, insertion loss and VSWR 
• MIL-PRF-28776 and MIL-PRF-39016 qualifications products available 
• Hermetically sealed 
• Terminals are arranged on .200” grid (1/2 and full size) or .150” grid (1/5 size) 
• Plain case or choice of various mounting brackets or mounting studs 
• Non-latching and latching designs • Choice of straight pins or solder hooks 
• MIL-R-5757, MIL-PRF-39016, MS27245 and MS27247 qualified products available 
• 5 to 50 A relays in compact or standard size cases 
• Balanced force design with permanent magnet drive 
• Terminal styles include socket pins, solder pin PCB terminals, and solder hook terminals 
• Numerous mounting options 
• Hermetically sealed, welded construction 
• MIL-PRF-6106 and MIL-PRF-83536 qualifications products available 
• Various models have switch ratings from 90 mA up to 100 A and 270 Vdc 
• AC, DC and bidirectional output 
• Available for panel or PC board mounting 
• Some types incorporate circuit protection, switch status, and trip status 
• Most are qualified to MIL-PRF-28750D or associated DSCC drawings 
• Solid-state timing circuitry with either electromechanical or solid state output 
• Sensors for voltage, frequency or phase 
• Most types offer a variety of enclosures and mounting options 
• Customized models available with tighter timing or sensing tolerance 
• Several models qualified to MIL-PRF-83726 
• Make and break current ratings from 5 to 600 A 
• For switching from 28 to 1800 Vdc 
• Small, lightweight, hermetically sealed units have gas or vacuum dielectric 
• Wide variety of mounting and termination styles 
• Contacts available in Form A, Form B, Form C and latching arrangements 
• Versions with current sensing and overcurrent trip capabilities 
• Voltage isolation to 70 kV 
• Current carrying capability to 110 A 
• Up to 10 million cycles 
• Various contact forms available 
• Flange, panel and PC board mounting styles 
• High voltage relays rated for isolation to 15 kV 
• 5, 10 and 15 A power switching relays for make and break applications 
• Contactors for high current power switching to 500 A 
• Latching and non-latching models 
• Lightweight, hermetically sealed construction 
• Interrupt currents up to 3300 A 
• Voltage isolation from 5 to 1800 Vdc 
• One-or two-pole models with normally open or normally closed main contacts 
• Non-position sensitive, hermetically sealed models for side or bottom mounting 
• Available with a variety of auxiliary contact arrangements 
• Latching and non-latching types 
• Lightweight construction with hermetically sealed panel mount enclosure 
• Main contact ratings of 100 A at 28 Vdc or 35 Vdc 
• Main contact arrangements to 2PDT, double break 
• 2PDT auxiliary contacts 
• Efficient magnetic latching design with self-deenergizing coil 
• Main contact ratings to 800 A; arrangements to 4PDT 
• Available with a variety of auxiliary contact arrangements 
• Side stable, latching and center off models 
• Hermetically or gasket sealed 
• More compact, lighter weight models as well as traditional designs 
• Bus bar mount versions available 
• Main contact ratings to 1000 A 
• Available with a variety of auxiliary contact arrangements 
• SPST and SPDT main contact forms 
• Standard, reverse current, and automatic dropout types 
• Hermetically or gasket-sealed IP67 models in conventional or bus bar mounting versions 
• Optional Hall effect current sensing 
• Overcurrent, undercurrent and over/undercurrent sensors and indicators 
• Overvoltage, undervoltage and over/undervoltage sensors and monitors 
• Overfrequency, under frequency and over/underfrequency sensors 
• Phase loss/rotation sensors and ground power monitors  
• Time delay versions available 
• Smart Contactors—RCCB, RPC & ELCU versions 
• From 0.5” (12.7 mm) diameter models producing only a few ounces (<1 N) of force at very short strokes, to 3” (76.2 mm) diameter models capable of 100 lb (445 N) force at 1” (25.4 mm) strokes 
• Push, pull or combination motion is available 
• Broad range of coil, termination, plunger options 
• Solid-state timing circuitry with either electromechanical or solid state output 
• Sensors for voltage, frequency or phase  
• Most types offer a variety of enclosures and mounting options 
• Customized models available with tighter timing or sensing tolerance 
• Contacts will not chatter when relay is subjected to 2000 ft-lb. shock blows 
• Panel mount relays are often used aboard combat naval vessels 
• Contact arrangements from 4PDT up through 24PDT 
• Rated to carry maximum currents of up to 10 A 
• AC and DC coils 
Електричні з'єднання
Контакти
Захист / оболонки
Маркування
Аксесуари до джгутів
Аксесуари до з'єднувачів
Автомати захисту
Запобіжники
Реле
Контактори
Клеї та герметіки
Обертові контактні прилади
Устаткування та інструмент